home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Tech Arsenal 1
/
Tech Arsenal (Arsenal Computer).ISO
/
tek-02
/
forge20.zip
/
README.TXT
< prev
Wrap
Text File
|
1993-01-04
|
2KB
|
49 lines
FORGE
from DAEDALIAN Software
P.O. Box 553
Grandville, MI 49418-0553
FORGE from DAEDALIAN Software is a FORm GEnerator for TURBO
Pascal and dBASE III data input forms. The user can paint a
screen using color, ASCII graphics characters and blinking
text. Input fields can be defined as integer, real or string.
The same screen can be used to generate either a complete
TURBO Pascal data input program, or a dBASE III .FMT file.
The .FMT files can even include PICTURE and RANGE options, and
are compatible with dBASE III PLUS, with the added advantage
that all of the ASCII graphics characters are available rather
than just the single or double line box commands built into
the dBASE III PLUS screen generator. Also, the .FMT files
produced by dBASE III PLUS that include the single or double
line box commands are not compatible with the Wordtech
Systems, Inc. compiler; the .FMT files produced by FORGE that
include ASCII graphics characters are.
FORGE was written entirely in TURBO Pascal, and only the .COM
file is provided. TURBO Pascal and dBASE III are not required
to use FORGE, but are required in order to make use of the
files produced by FORGE.
SYSTEM REQUIREMENTS: IBM PC, PC XT, PCjr or true compatible,
with 128k of memory, one disk drive, color or mono, and DOS
2.1 or higher.
The 30+ page manual is contained on a disk file called
FORGE.DOC. This file is preformatted for 66 lines per page,
and should print out properly by simply typing:
"COPY FORGE.DOC >LPT"
at the DOS prompt. Make sure the print head is at the very
top edge of the form before starting.
FORGE software
(c) Copyright 1986 David Remelts
All Rights Reserved
FORGE manual
(c) Copyright 1986 David Remelts
All Rights Reserved